JBL | 104 - Studio Monitors Bluetooth - Vit
Device Compatibility
- Bluetooth
What's in the box?
- 1 x 104-BT Master Monitor
- 1 x 104-BT Extension Monitor
- 1 x Extension monitor speaker wire (2-conductor, 2 meters)
- 1 x 3.5 mm to RCA audio cable
- 1 x Regional power cable
- 1 x Quick setup guide
Specifikationer
General |
Brand: | JBL |
Bluetooth Version: | 5.0 |
Low Frequency Transducer: | 4.5 in (118 mm) |
High Frequency Transducer: | 0.75 in (19 mm), soft dome |
Crossover: | 1725 Hz, 1st order |
Power Amp: | 60 W (30 W each speaker), Class D |
Sensitivity: | 87 dB SPL @ 1 m with -10 dBV Aux In (Volume = Max) |
Maximum Continuous SPL: | 89 dB |
System Peak SPL: | 102 dB (pink noise, 12 dB crest factor) |
Maximum SPL, Momentary Peak: | 104 dB |
Maximum Peak Input Level: | (-10 dBV / +4 dBu):+6 dBV / +20.3 dBu |
Frequency Range: | (-3 dB SPL)88 Hz – 20 kHz |
Frequency Range: | (-10 dB SPL)60 Hz – 20 kHz |
System Rated Impedance: | 8 Ω |
Minimum Impedance: | 7.8 Ω @ 260 Hz |
Cabinet Tuning Frequency: | 72 Hz |
System Distortion Criteria: | <10% THD at maximum output with full compressor / limiter engagement |
Electrical Distortion Criteria: | <0.2%THD @ 1 kHz, 2.83 VRMS output; <1% THD @ 1 kHz, full rated output |
Signal to Noise Ratio: | 75 dBA (A-Weighted), 70 dBr (unweighted), relative to 2.83 VRMS output on HF |
Coverage: (Horizontal x Vertical) | 120º x 60º |
Acoustic Test Specification: | ATS# 1000340443 |
Dimensions |
Height: | 9.72 in (247 mm) |
Width: | 6.02 in (153 mm) |
Depth: | 4.88 in (124 mm) |
Net Weight: | Primary Monitor = 4.54 lb (2.06 kg); Secondary Monitor = 3.81 lb (1.73 kg) |
Design |
Enclosure Type: | Ported |
Enclosure Material: | ABS with metal grille |
Enclosure Finish: | Matte black acrylic paint (104-BT) ; Matte white acrylic paint (104-BTW) |
Audio Output |
System Output Type: | 1/8" stereo headphone with auto speaker mute |
Audio Input |
System Input Type: | Bluetooth, 1/8" Aux, RCA, 1/4" TRS balanced |
Input Selection Options: | Bluetooth, Aux, RCA, TRS, All |
Power Interface |
System Power Handling: | 30 W x 2 @ 100 hours, IEC/SMS |
System Polarity: | EIA |
AC Input Voltage: | 100 – 240 VAC (± 10%), 50/60 Hz |
Current Draw: | 85 watts |
Electrical Current Draw (W) Idle: | 100 / 240 VAC3.52 / 3.70 |
Electrical Current Draw (W) Max Power: | 100 / 240 VAC80 / 80 |
Electrical Current Draw (W) Low Power Standby Mode: | 100 / 240 VAC0.34 / 0.46 |