Synq | SCX-12400
- This powerful 12 “coaxial speaker is the perfect point source if you care about an excellent loudspeaker design
- It produces a consistent 60° x 40° dispersion pattern with a smooth tonal response
- As a perfect point source it allows you to build speaker cabinets without unwanted phase problems
- Lightweight design thanks to the neodymium magnet structure
Notes:
- AES power is measured with 6dB crest factor continuous pink noise in 2 hours duration
- Max power is defined as 3dB higher than the nominal rating
- Sensitivity is measured at one meter at 2.83V and 8 ohm nominal impedance
- All measurement of the speaker is done after a sufficient high level of 20Hz sine wave test
- Xmas is defined at the BL drops by 18% of the original figure
Specifikationer
General |
Brand: | Synq |
Power handling capacity W: (AES) | 400 |
Max power Watts: | 800 |
Nominal impedance LF/HF Ω: | 8/16 |
Frequency range Hz: | 65-20K |
LF |
Sensitivity: (1W/1m) dB | 98.5 |
Voice coil diameter: (mm/in) | 75.5/3 |
Fs Hz: | 70 |
Re Ω: | 6 |
Qms: | 5.12 |
Qes: | 0.38 |
Qts: | 0.36 |
Vas L: | 35 |
Mms gr: | 55 |
Cms mm/N: | 0.09 |
BL Tm: | 19.8 |
Xmax mm: | 5.0 |
HF |
Throat diameter mm/in.: | 25/1 |
Power handling capacity W: (AES) | 45 |
Nominal impedance Ω: | 16 |
Sensitivity: (2.83V/1m) dB | 102 |
Frequency range Hz: | 1.5K-20K |
Voice coil diameter mm/in: | 44.4/1.75 |
Re Ω: | 12 |