DBX | 234-XS
Fasvändare på alla utgångar, lowcut filter samt balanserade XLR in och utgångar. Det finns även möjlighet till LF summering på Low utgången.
- Aktivt delningsfilter med 24 dB per oktav
- Kan köras som stereo 3-vägs eller mono-4 vägs
Teknisk Info:
- Input: XLR
- Output: XLR
- Ställbar gain på alla utgångar
- Delning från 45 Hz
- Mått: 440 x 483 x 175 mm
- Vikt: 1,8 kg
Features
- XLR balanced ins and outs
- Mode switches for mono 4-way or stereo 2-way/3-way operation
- Low frequency summed (subwoofer) output
- x10 range switch on both channels
- 40Hz high pass (low cut) filter both channels
- Phase reverse switch on all outputs
- Individual level controls on all outputs
- 24dB per octave Linkwitz-Riley filters (the professional standard)
- Stereo/Mono status LEDs indicate the selected mode
- dbx® 2 year parts and labor as standard
- CSA NRTL/C approved
- CE compliant
Downloads
| Language | Size | Uploaded |
234xs CAD drawing front | ![]() | 224 KB | Feb 15, 2022 |
234xs CAD drawing rear | ![]() | 192 KB | Feb 15, 2022 |
234xs Cut Sheet-English | ![]() | 1.6 MB | Feb 15, 2022 |
234xs Owner's Manual-French | ![]() | 1.13 MB | Feb 15, 2022 |
234xs Owner's Manual-Spanish | ![]() | 1.06 MB | Feb 16, 2022 |
234xs Owner's Manual-English | ![]() | 2.32 MB | Feb 14, 2022 |
If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.
Specifications
Allmänt |
Brand: | DBX |
Input Connectors: | XLR |
Input Type: | Electronically balanced/unbalanced, RF filtered |
Input Impedance: | Balanced >50k ohm, unbalanced >25k ohm |
Max Input: | >+22dBu balanced or unbalanced |
CMRR: | >40dB, typically >55dB at 1kHz |
Output Connectors: | XLR |
Output Type: | Impedance-balanaced/unbalanced, RF filtered |
Output Impedance: | Balanced 60 ohm, unbalanced 30 ohm |
Max Output: | >+21dBu balanced/unbalanced into 2k ohms or greater |
Bandwidth: | 20Hz to 20kHz, +/-0.5dB |
Frequency Response: | < 3 Hz to > 90 kHz, +0/-3 dB |
Signal to Noise Ratio: | Ref: +4 dBu, 22 kHz measurement bandwidth |
Signal-to-Noise: (Stereo Mode) | >94dB (Low Output), >93dB (Mid Output), >90dB (High Output) |
Signal-to-Noise: (Mono Mode) | >94dB (Low Output, Low/Mid Output); >92dB (High/Mid Output); >88dB (High Output) |
Dynamic Range: | > 106 dB, unweighted, any output |
THD+Noise: | < 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz |
Interchannel Crosstalk: | < -80 dB, 20 Hz to 20 kHz |
Crossover Frequencies: (Stereo Mode) | Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High 450Hz to 9.6kHz (x10 setting) |
Crossover Frequencies: (Mono Mode) | Low/Low-Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Low-Mid/High-Mid: 450 Hz to 9.6 kHz; High-Mid/High: 450 Hz to 9.6 kHz |
Crossover Filter Type: | Linkwitz-Riley, 24 dB/octave, state-variable |
Low cut Switch: | Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel. |
Phase Invert Switch: | Inverts the phase at the output, one switch per output. |
x1 / x10 Switch: | Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel. |
Mode Switch: | Selects stereo/mono and 2/3/4-way operation |
LF Sum Switch: | Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2’s low output phase invert LED to indicate that this output is not operational in the LF sum mode. |
Indicators: | Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output) |
Operating Voltage: | 100-120 VAC 50/60Hz; 120 VAC 60Hz 230 VAC 50/60Hz |
Operating Temperature: | 32°F to 113°F (0°C to 45°C) |
Power Consumption: | 15W |
Power Connector: | IEC receptacle |
Dimensions: | 1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm) |
Unit Weight: | 4.0 lbs. (1.8 kg) |
Shipping Weight: | 5.8 lbs. (2.6 kg) |